Skip to content

Texas Well Water Quality Atlas

Texas Well Water Quality Atlas: arsenic, nitrate, fluoride and salts in tested wells

Among 10,379 Texas wells with arsenic tested since 1992, 742 (7.1%) exceeded the 10 µg/L drinking-water limit in their most recent test. For nitrate it was 697 of 11,026 (6.3%) above 10 mg/L as nitrogen; for fluoride, 427 of 10,964 (3.9%) above 4 mg/L; and for total dissolved solids, 2,434 of 10,656 (22.8%) above 1,000 mg/L. These are wells someone chose to test, from the public records of the Texas Water Development Board and the Water Quality Portal, counted with rules written before any result was compared with a limit.

Data: Texas Water Development Board Groundwater Database, file of November 13, 2026; Water Quality Portal (USGS and EPA), download of November 15, 2026. Page published November 16, 2026.

Texas in 3D

What the laboratories found, county by county

Skip the tour ↓
Texas in 3D: each county is a column, taller and brighter where more of its tested wells were above the arsenic limit, with the highest columns on the plains of the Panhandle and West Texas

01Arsenic

Every column is a county

Height and color are the share of the county's tested wells whose most recent test since 1992 was above the limit. For arsenic, 742 of 10,379 tested Texas wells (7.1%) were above 10 µg/L. Counties with fewer than 10 tested wells stay flat and striped: too few wells for a share.

02Arsenic

The Ogallala: arsenic that comes from the rock

In the Ogallala Aquifer, 318 of 1,804 tested wells (17.6%) were above the arsenic limit. In Dawson County it was 33 of 38 (86.8%), the highest share among counties with 30 tested wells or more. Median year of those tests: 2007.

03Fluoride

Fluoride, on the same plains

Statewide, 427 of 10,964 tested wells (3.9%) were above 4 mg/L of fluoride. In Lynn County, 25 of 36 (69.4%), the highest share among counties with 30 tested wells or more. Arsenic, fluoride and salts come mostly from the rock.

04Nitrate

The Seymour: nitrate that comes from the surface

In the Seymour Aquifer, 106 of 168 tested wells (63.1%) were above 10 mg/L of nitrate as nitrogen; statewide, 697 of 11,026 (6.3%). In Haskell County, 29 of 30 (96.7%). Nitrate comes mostly from the surface: fertilizer, manure, septic systems.

05Salts

Salts: nearly one tested well in four

2,434 of 10,656 tested Texas wells (22.8%) had more than 1,000 mg/L of total dissolved solids in their most recent test. In Hidalgo County, 83 of 95 (87.4%), the highest share among counties with 30 tested wells or more.

06No data

Where nobody's tests reached the state

Archer, Rockwall, Shackelford and Stephens have no well with arsenic or nitrate tested since 1992 in the public databases, and 37 of 254 counties have fewer than 10 wells tested for arsenic. No data is not good news or bad news.

07The study

Nearby tested wells are the best guide

To estimate one well's arsenic, the tests of wells within 15 miles had 10.6% less error than the county figure and 15.4% less than the USGS national model. Knowing the aquifer added nothing. The rules and code were fixed and timestamped before it was run.

Read the study →

08Your turn

Now explore it yourself

Switch the substance, drag to turn the map and tap any county for its four figures, with the number of wells and years behind each one. Nothing here says what is in a particular well: the only way to know is to test it.

All 254 counties in a table →

All of Texas, wells tested since 1992

Each well counts once, with its most recent accepted test. The interval is the 95% Wilson interval; it assumes independent wells, so the real one is wider.

IndicatorWells tested since 1992ExceededShare95% Wilson intervalTests since 2011 only
Arsenicabove 10 µg/L10,3797427.1%6.7 to 7.76.6%225 of 3,428
Nitrateabove 10 mg/L as N11,0266976.3%5.9 to 6.84.1%146 of 3,528
Fluorideabove 4 mg/L10,9644273.9%3.5 to 4.34.2%150 of 3,562
Fluoride (secondary level)above 2 mg/L10,9642,07819.0%18.2 to 19.719.8%704 of 3,562
Total dissolved solidsabove 1,000 mg/L10,6562,43422.8%22.1 to 23.618.9%625 of 3,313

Nearly one in four tested Texas wells (2,434 of 10,656, 22.8%) had more than 1,000 mg/L of total dissolved solids in its most recent test since 1992. One in five (2,078 of 10,964, 19.0%) was above the 2 mg/L secondary level for fluoride.

Place explains most of it

Arsenic above the limit goes from 0.2% of 1,031 tested wells in the Carrizo-Wilcox Aquifer to 17.6% of 1,804 in the Ogallala. Nitrate reaches 63.1% of 168 tested wells in the Seymour Aquifer. Arsenic, fluoride and salts come mostly from the rock; nitrate mostly from the surface (fertilizer, manure, septic systems).

Major aquiferArsenic above 10 µg/LNitrate above 10 mg/L as N
Ogallala17.6%318 of 1,80410.8%207 of 1,923
Gulf Coast12.5%224 of 1,7942.5%43 of 1,728
Trinity0.5%7 of 1,3151.7%24 of 1,413
Carrizo-Wilcox0.2%2 of 1,0310.7%8 of 1,085
Edwards-Trinity Plateau1.5%15 of 1,0205.7%60 of 1,046
Edwards (Balcones Fault Zone)0.8%5 of 6090.6%4 of 694
Pecos Valley6.0%11 of 18213.1%25 of 191
Seymour2.0%3 of 15163.1%106 of 168
Hueco-Mesilla Bolson34.0%18 of 530.0%0 of 134
Arsenic above 10 µg/L: share of tested wells, by aquiferWells tested since 1992, with their most recent test. Aquifers with 30 tested wells or more, ordered by number of wells, not by result: each row is a different set of wells and years.

Major aquifers

Ogallala17.6% · 318 of 1,804
Gulf Coast12.5% · 224 of 1,794
Trinity0.5% · 7 of 1,315
Carrizo-Wilcox0.2% · 2 of 1,031
Edwards-Trinity Plateau1.5% · 15 of 1,020
Edwards (Balcones Fault Zone)0.8% · 5 of 609
Pecos Valley6.0% · 11 of 182
Seymour2.0% · 3 of 151
Hueco-Mesilla Bolson
Depends on which tests count: 27.1% to 46.2%
34.0% · 18 of 53

Minor aquifers

Dockum4.7% · 12 of 258
Queen CityNone observed: 0 of 209
WoodbineNone observed: 0 of 151
Ellenburger-San SabaNone observed: 0 of 148
Yegua-Jackson3.6% · 5 of 137
HickoryNone observed: 0 of 121
Sparta0.9% · 1 of 113
West Texas Bolson15.5% · 13 of 84
BlaineNone observed: 0 of 78
Igneous15.7% · 11 of 70
LipanNone observed: 0 of 59
Brazos River Alluvium4.5% · 2 of 44
Bone Spring-Victorio PeakNone observed: 0 of 43
Capitan Reef Complex2.8% · 1 of 36
MarathonNone observed: 0 of 30
NacatochNone observed: 0 of 30
  • Share above the limit (latest test of each well)
  • 95% Wilson interval
  • Range when changing which wells and tests count
  • Ever above since 1992 (another question)

All 35 aquifer rows, with nitrate, fluoride and salts

Highest arsenic by county

Counties with 30 tested wells or more.

CountyArsenic above 10 µg/LMedian year of the tests
Dawson86.8%33 of 382007
Terry82.1%46 of 562012
Gaines71.7%66 of 922004
Martin68.3%28 of 412008
Yoakum63.6%35 of 552012
Lynn58.3%21 of 362007

Highest nitrate by county

Counties with 30 tested wells or more.

CountyNitrate above 10 mg/L as NMedian year of the tests
Haskell96.7%29 of 302001
Knox73.7%28 of 381992
Lynn60.3%79 of 1311995
Dawson46.2%18 of 392007
Tom Green43.9%29 of 662003
Collingsworth40.7%24 of 592009

See all 254 counties

The study: nearby tested wells are the best guide

To estimate a Texas well's arsenic, tests from wells within 15 miles had 10.6% less error than the county figure and 15.4% less than the USGS national model. Knowing the aquifer added nothing. Its rules and code were fixed and timestamped before it was run, it was run once, and three independent programs gave the same result.

The full study: question, design, results and what it does not say

Questions this atlas answers

What this shows and what it doesn't

  • These are wells someone chose to test, not a random sample of Texas wells. Since 1992 about 30% of the tested wells are public supply and about 30% domestic.
  • Nothing here says what is in the water of a particular well or property. The only way to know is to test that well.
  • Much of the data is old: the median year of the latest test is 2004 or 2005. It describes what was measured, not today's water.
  • Zero observed is not zero: with 0 of 30 wells, the data are compatible with up to 11%.
  • The figures count wells, not people or volume of water.

Test your own well

No map or table can say what is in the water of one well. These figures say how often the tested wells of an area went over a limit; the only way to know your well is to have its water tested by an accredited laboratory.

The drinking-water standards used here apply to public water systems. No law requires a private well to meet them: here they are only the yardstick.

Why it matters

No law requires a private well to be tested, and someone buying rural land rarely knows what water is under it.

Everything in this atlas

  • All 254 counties

    Find your county: the four substances, with the number of wells and years behind each figure.

  • By aquifer

    The 35 aquifer rows, with charts: where arsenic, nitrate, fluoride and salts are highest.

  • The study

    What best estimates one well's water: nearby tests, the county, the aquifer or the USGS model.

  • Methodology

    Which tests count, what a well is, what each figure means and every limit of the data.

  • Open data

    Six CSV files, free under CC BY 4.0, archived with a DOI.

How deep wells are and which formation they draw from: Texas Well Atlas.

Full video transcript

[0:00] Texas well water. We looked at more than ten thousand wells that someone chose to test for arsenic. 7.1% were over the federal limit. In some counties, more than eight in ten. Here's everything we found, how we did it, and how to check your county, free.

[0:20] About three million Texans drink from private wells. And between 65% and 80% of private well owners have never tested their water. At TerraFunded we sell rural land in Texas, and after how deep is the water, the next question is always: what's in it? We couldn't find one place that put the public test results together, with rules anyone can check. So we built it. It's called the Texas Well Water Quality Atlas, and it's free.

[0:51] Everything comes from two public databases. The groundwater database of the Texas Water Development Board, in its file of November thirteenth, 2026. And the Water Quality Portal, run by the USGS and the EPA, downloaded two days later. Together, that's 416,882 lab results, from 76,613 sites. Even a federal survey from the late 1970s, with 13,554 sites.

[1:25] If this is useful to you, subscribe and give it a like. That's how it reaches more people who drink from a well.

[1:34] Now, the method. Every rule is written in code, so anyone can repeat it. Rule one: each well counts once, with its most recent test. Rule two: only tests since 1992, against the limits used for public water systems. Arsenic above ten micrograms per liter. Nitrate above ten milligrams per liter, as nitrogen. Fluoride above four. And total dissolved solids, the salts, above one thousand.

[2:05] Rule three: units. One field in the state file is called nitrate nitrogen, but its unit is nitrate, which is 4.43 times bigger. Read the wrong way, it multiplies every count. So the code converts every result before it compares it. Rule four: every percentage comes with its range, a 95% Wilson interval. And with fewer than ten wells, we only show the count, never a percentage.

[2:35] Then we checked our own code. We recalculated reports already published by the state and by the Bureau of Economic Geology, with each author's rules, and our numbers landed within 0.3 points of theirs.

[2:51] So, what did we find? Statewide, with tests since 1992. Arsenic: 742 of 10,379 wells, 7.1%, were over the limit in their most recent test. Nitrate: 697 of 11,026, 6.3%. Fluoride above four: 3.9%. And above two, the level where it can stain teeth, 19%. And salts: 2,434 of 10,656. 22.8%. Nearly one in four.

[3:35] But a statewide number hides the most important thing. The place explains almost everything. In the Ogallala aquifer, 17.6% of 1,804 tested wells were over the arsenic limit. In the Carrizo-Wilcox, 0.2%, of 1,031. And nitrate draws a different map. In the Seymour aquifer, 106 of 168 wells, 63.1%.

[4:06] Here it is, county by county. Each county is a column: the taller and darker, the bigger the share of its tested wells over the limit. Arsenic rises on the South Plains. In Dawson County, 33 of 38. In Terry, 46 of 56. Switch to nitrate, and the columns move. Haskell, 29 of 30. Knox, 28 of 38. And with salts, the columns spread across half the state.

[4:36] At the other end, of 132 counties with at least thirty wells tested for arsenic, 68 had none over the limit. But zero observed is not zero risk. With 0 of 30, the real share could still be as high as 11%.

[4:56] Then came the question we cared about most. If you want to estimate the water of one well, what's the best guide? The county figure? The name of the aquifer? The national arsenic model of the USGS? Or the tested wells around it? We fixed the rules and the code, with a date, before running the study. And we ran it once.

[5:18] 8,715 test wells for arsenic. The tested wells within 15 miles had 10.6% less error than the county figure, 35.7% less than the state figure, and 15.4% less than the national model. Where there are no tests nearby, though, the national model does help. And adding the aquifer? It didn't help. The error rose 0.68%. Three independent programs got the same result.

[5:50] Why? Because nearby wells almost always share the same aquifer, so distance already carries that information. For nitrate, adding the depth was inconclusive. So the Atlas is organized by distance and by county, not by aquifer.

[6:08] Another finding: home wells and public supply wells are not the same. Since 1992, nitrate was over the limit in 8.5% of tested home wells, and in 1.8% of public supply wells. Comparing wells of the same aquifer, depth and period, the gap narrows to 8.3 against four percent. But it doesn't disappear. And the typical home well is half as deep: 254 feet, against 550. In wells under 100 feet, nitrate was over the limit in about 27%, home or public.

[6:49] How long is a test good for? We looked at wells tested twice, at least five years apart. When the first arsenic test was far below the limit, five micrograms or less, fewer than 1% crossed it later: 19 of 2,913. But between eight and ten, right under the limit, 23% crossed: 17 of 73. If your last test was close to the limit, test again.

[7:20] And where there's no data. 217 of the 254 counties have at least ten wells with arsenic tested since 1992. Four counties have none at all: Archer, Rockwall, Shackelford and Stephens. On the map, counties with fewer than ten wells stay flat, with stripes. To look up yours, open the counties page: all 254 are in one table, with the four indicators, how many wells were tested, and the median year of the tests.

[7:54] Now, what this does not tell you. It doesn't tell you what's in any one well. Arsenic and nitrate don't change the color or the taste of the water. The only way to know is to test your own well at an accredited lab. And there hasn't been an outside review by specialists yet. That's why every figure is open for you to check.

[8:18] All the data is free. The tables for all 254 counties, every aquifer, and the study results, as CSV files, with a DOI on Zenodo, under a Creative Commons license. Use it, cite it, check it.

[8:35] Tell me in the comments: what county is your well in?

[8:40] The Texas Well Water Quality Atlas is at terrafunded.com/water-quality. Look up your county, and share it with anyone who drinks from a well. See you in the next one.

Sources you can check

The full method · All open data

How to cite this

Blanco, R. (2026). Texas Well Water Quality Atlas: arsenic, nitrate, fluoride and dissolved solids in tested wells, 1992–2026 [Data set]. TerraFunded. https://doi.org/10.5281/zenodo.24287393

Free to use with credit under CC BY 4.0. Please also credit the Texas Water Development Board. Dataset DOI: 10.5281/zenodo.24287393.

Rodrigo Blanco

Rodrigo Blanco, Founder and CEO of TerraFunded, a Texas company that sells rural land. These pages carry no listings, prices or offers.

Reviewed by two AI models in six rounds and checked with three independent programs; not yet reviewed by outside specialists.

Press and researchers: [email protected]