How deep are water wells in Santo, Texas?

Q: How much does a water well cost in Santo?

At the median depth (180 feet), a complete well would cost roughly $7,000 to $17,500, by TerraFunded's estimate from published Texas driller prices. The real price comes from a licensed driller's quote.

Q: Do I need a permit to drill a well in Santo?

In the state's boundary file (current as of November 2019) no groundwater conservation district covers Santo. Districts created or enlarged since then are missing from that file, so confirm with the county or TWDB before drilling. Anywhere in Texas the well must be drilled by a licensed driller, who files the report with the state.

Only 23 home water wells in and around Santo, Texas have been reported since 2001, so treat this as a rough guide: the middle half are 150 to 200 feet deep (median 180 ft). Estimated cost of a complete well at the median depth: $7,000 to $17,500.

This page is based on fewer than 30 wells, so it is kept out of search engines until more reports come in. Treat every figure as a rough guide.

Updated every day from Texas Water Development Board driller reports. Last update: November 11, 2026, using the state file of November 10, 2026.

See the wells and layers at an exact point Palo Pinto County

Under Santo, Palo Pinto County

The well and the water are the median of 23 real wells. This atlas does not have a state layer model for this area yet.

Home wells in and around Santo

Each dot is a home well from a state driller report, colored by depth. Tap one for its details and official report. Tap an empty spot to see what is under that point.

See underground

Well depth (ft)

<100
100
200
300
400
600
800+

Dashed line: Santo and about 2 miles around it

Key figures

Typical depth (middle half): 150 to 200 feet
Median depth: 180 feet
Deepest 10% are past: 240 feet
Yield (median): 2 gpm; 17 wells, gallons per minute
Wells used: 23; Since 2001
Inside the city limits: 6; the rest within 2 miles
All years on file: 23; median 180 ft, since 2006
Confidence: Few wells (10 to 29)

The well and the water are the median of 23 real wells. This atlas does not have a state layer model for this area yet.

Which formation do wells in Santo draw from?

We cannot say yet for Santo. This atlas assigns layers with the TWDB layered models processed so far (the Northern Trinity and Woodbine model, the Hill Country Trinity model, the northern Gulf Coast Aquifer model and the High Plains Aquifer System model), and none covers this area with enough wells. The depth, water level and yield on this page do come from the real wells here.

See the aquifers mapped under Palo Pinto County

Depth over time

Too few wells per period in and around Santo to compare depth over time. Since 2006, 23 home wells have been reported, with a median of 180 feet.

Period	Median depth (ft)	Wells
2006–2010	under 10 wells	6
2011–2015	under 10 wells	4
2016–2020	under 10 wells	3
2021–2025	200	10

What a well costs in Santo

At the median depth for Santo (180 feet), a complete home well would cost roughly $7,000 to $17,500: $25 to $60 per foot for drilling, casing and seal, plus $2,500 to $6,500 for the pump, pressure tank, controls and hookup at the well. Across the whole middle half of depths (150 to 200 feet) the range runs from $6,500 to $18,500. This is TerraFunded's estimate from published Texas prices, not a quote, and it leaves out trenching and the line to the house. Get prices from at least two licensed drillers.

Where it sits

Wells in Palo Pinto County
Unincorporated community (Census-designated place) · 32.6056, -98.2138

Nearby places

Median depth of home wells in each place.

Brazos 200 ft
Lipan 160 ft
Palo Pinto 160 ft
Millsap 240 ft
Dennis 200 ft
Mineral Wells 240 ft

All Texas cities and towns

Common questions

How deep do you have to drill a well in Santo, Texas?

Only 23 home water wells in and around Santo, Texas have been reported since 2001, so treat this as a rough guide: the middle half are 150 to 200 feet deep (median 180 ft). One in ten goes past 240 feet. The depth a given tract needs depends on where it sits and what layers the driller hits.

How much does a water well cost in Santo?

At the median depth (180 feet), a complete well would cost roughly $7,000 to $17,500, by TerraFunded's estimate from published Texas driller prices. The real price comes from a licensed driller's quote.

Do I need a permit to drill a well in Santo?

In the state's boundary file (current as of November 2019) no groundwater conservation district covers Santo. Districts created or enlarged since then are missing from that file, so confirm with the county or TWDB before drilling. Anywhere in Texas the well must be drilled by a licensed driller, who files the report with the state.

How these numbers are made

We count new and replacement domestic (home) wells whose coordinates fall inside the place boundary or within 2 miles of it. We use the last 10 years when there are at least 30 wells; otherwise all since 2001. The median is the middle well and the middle half runs from the 25th to the 75th percentile.

These are depths of real wells drilled nearby, not a promise about any property. Groundwater can change over short distances and with drought. A licensed water well driller can tell you what to expect on a specific tract.

Read the full methodology · Download the data (CSV, CC BY 4.0)

How to cite

TerraFunded (2026). Texas Well Atlas: Underground. From Texas Water Development Board driller reports and groundwater availability models (data as of November 10, 2026). https://terrafunded.com/wells/places/santo-tx. License CC BY 4.0. https://doi.org/10.5281/zenodo.24126380.