Skip to content
ENES
Marketplace

How deep are water wells in Hamshire, Texas?

Home water wells in and around Hamshire, Texas are typically 176 to 230 feet deep (median 220 ft, 91 wells drilled in the last 10 years). All the wells the model covers draw from the Chicot Aquifer, according to the state's northern Gulf Coast Aquifer model (TWDB). Estimated cost of a complete well at the median depth: $8,000 to $19,500.

Updated every day from Texas Water Development Board driller reports. Last update: November 11, 2026, using the state file of November 10, 2026.

See the wells and layers at an exact pointJefferson County
What is under Hamshire, TexasUnderground column at the center of Hamshire: median well 220 ft, middle half 176 to 230 ft, water at 22 ft, and the layers of the state's model with their thickness.Chicot: 0 to 1,680 ftChicotcontinues to 9,619 ft0100200300ftGround level · 23 ft above sea levelMedian well: 220 ftWater standing in the well from 22 ftWater level22 ftMiddle half176–230 ftMedian well220 ft

Under Hamshire, Jefferson County

Layers at the center of Hamshire from TWDB's northern Gulf Coast Aquifer model (cells of about 0.62 mile (1 km)), at true depth scale. The well and the water are the median of 91 real wells.

Home wells in and around Hamshire

Each dot is a home well from a state driller report, colored by depth. Tap one for its details and official report. Tap an empty spot to see what is under that point.

See underground

Well depth (ft)

  • <100
  • 100
  • 200
  • 300
  • 400
  • 600
  • 800+

Dashed line: Hamshire and about 2 miles around it

Key figures

Typical depth (middle half)
176 to 230 feet
Median depth
220 feet
Deepest 10% are past
238 feet
Water level (median)
22 feet
90 wells
Yield (median)
15 gpm
29 wells, gallons per minute
Wells used
91
In the last 10 years
Inside the city limits
56
the rest within 2 miles
All years on file
204
median 220 ft, since 2002
Confidence
Standard (30 or more wells)

When the wells were finished, the water stood a median 22 feet below the surface (90 wells), well above the bottom: the typical well holds about 198 feet of water.

What is under Hamshire, TexasUnderground column at the center of Hamshire: median well 220 ft, middle half 176 to 230 ft, water at 22 ft, and the layers of the state's model with their thickness.Chicot: 0 to 1,680 ftChicotcontinues to 9,619 ft0100200300ftGround level · 23 ft above sea levelMedian well: 220 ftWater standing in the well from 22 ftWater level22 ftMiddle half176–230 ftMedian well220 ft
Layers at the center of Hamshire from TWDB's northern Gulf Coast Aquifer model (cells of about 0.62 mile (1 km)), at true depth scale. The well and the water are the median of 91 real wells.

Which formation do wells in Hamshire draw from?

All the wells the model covers draw from the Chicot Aquifer, according to the state's northern Gulf Coast Aquifer model (TWDB).

Layer (state's model)ShareWellsTypical depth (ft)
Chicot100%91176–230

For 97% of these wells the report says where the water enters (the screen or the open hole), and we use the middle of that interval.

The layers under the center of Hamshire

From the state's model, at 23 feet above sea level. These are the model's depths at that one point, not those of any particular lot.

Depths in feet below ground.
Layer (state's model)Top (ft)Bottom (ft)Thickness (ft)
Chicotsand, silt and clay01,6801,680
Evangelinesand and clay1,6803,8112,131
Jasper, Catahoula and Burkevillesand, sandstone, clay and volcanic tuff3,8119,6195,808

Depth over time

Home well depth in and around Hamshire has not changed meaningfully in 20 years: the median was 220 feet in 2003 to 2007 and 222 feet in 2021 to 2025 (a difference under 10% or within the margin of error).

PeriodMedian depth (ft)Wells
2001–200520928
2006–201022054
2011–201522023
2016–202021849
2021–202522246
2026under 10 wells4

What a well costs in Hamshire

At the median depth for Hamshire (220 feet), a complete home well would cost roughly $8,000 to $19,500: $25 to $60 per foot for drilling, casing and seal, plus $2,500 to $6,500 for the pump, pressure tank, controls and hookup at the well. Across the whole middle half of depths (176 to 230 feet) the range runs from $7,000 to $20,500. This is TerraFunded's estimate from published Texas prices, not a quote, and it leaves out trenching and the line to the house. Get prices from at least two licensed drillers.

Where it sits

Nearby places

Median depth of home wells in each place.

All Texas cities and towns

Common questions

How deep do you have to drill a well in Hamshire, Texas?

Home water wells in and around Hamshire, Texas are typically 176 to 230 feet deep (median 220 ft, 91 wells drilled in the last 10 years). One in ten goes past 238 feet. The depth a given tract needs depends on where it sits and what layers the driller hits.

What aquifer or formation do wells in Hamshire draw from?

All the wells the model covers draw from the Chicot Aquifer, according to the state's northern Gulf Coast Aquifer model (TWDB). This is an estimate from the state's regional model, not a survey of the lot.

How much does a water well cost in Hamshire?

At the median depth (220 feet), a complete well would cost roughly $8,000 to $19,500, by TerraFunded's estimate from published Texas driller prices. The real price comes from a licensed driller's quote.

How deep is the water in Hamshire?

When the wells were finished, the water stood a median 22 feet below the surface (90 wells), well above the bottom: the typical well holds about 198 feet of water. The level moves with drought and from one well to the next.

Do I need a permit to drill a well in Hamshire?

In the state's boundary file (current as of November 2019) no groundwater conservation district covers Hamshire. Districts created or enlarged since then are missing from that file, so confirm with the county or TWDB before drilling. Anywhere in Texas the well must be drilled by a licensed driller, who files the report with the state.

How these numbers are made

We count new and replacement domestic (home) wells whose coordinates fall inside the place boundary or within 2 miles of it. We use the last 10 years when there are at least 30 wells; otherwise all since 2001. The median is the middle well and the middle half runs from the 25th to the 75th percentile.

To tell which layer a well draws from, we take the ground elevation at its location, subtract the depth of the interval where water enters (or the bottom of the hole when the report does not give one) and see which layer of the state's model that point falls in.

For 97% of these wells the report says where the water enters (the screen or the open hole), and we use the middle of that interval.

How well it works: In 14,333 wells in the area of the state's northern Gulf Coast Aquifer model (Houston and Southeast Texas) where the State of Texas recorded the aquifer, the formation our method says the well draws from (as grouped on these pages) is the one the state recorded in about 83% of them, and that formation or the one next to it in at least 99%; of the 3,578 of those wells that the state records in the Evangeline, it names the Evangeline for about 51% and the Chicot for most of the rest.

  • The layers come from the Texas Water Development Board's northern Gulf Coast Aquifer model, with cells of about 0.62 mile (1 km). It is a regional model, not a survey of any lot.
  • The state's model has cells of about 3,277 ft (1 km, 0.62 mile); we read it on a grid of about 0.6 by 0.7 miles. It is not a survey of any lot, so we give ranges.
  • Figures go by three groups: Chicot, Evangeline, and Jasper and Catahoula with the Burkeville. The state's records cannot tell the Burkeville, the Jasper and the Catahoula apart at a well (alone, the Burkeville matched 33% and the Catahoula 50%), so they are never named one by one as the formation of a well or a place.
  • The line between the Chicot and the Evangeline is drawn differently by different studies. The state's records put about half of their Evangeline wells in what the model draws as the Chicot, mostly deeper wells in Harris, Montgomery, Waller, Liberty and Austin counties. Where both appear, the split is approximate.
  • "Near or below the base" means the well ends near or below the base of the Gulf Coast Aquifer (under the Catahoula: Jackson Group, Yegua and older). It is 1.3% of home wells; half of them end within about 85 ft of the base. That is not an error: the model simply ends there.
  • The model's top layer is a uniform 49 ft slab for the water table zone, not a rock unit; we merge it into the unit beneath. The model also covers Colorado, Lavaca, Fayette, Wharton and Matagorda counties (outside Groundwater Management Area 14), with the same framework. Texas part only.
  • We never use the model's water levels. The water level on this page is the one each driller measured when the well was finished.

These are depths of real wells drilled nearby, not a promise about any property. Groundwater can change over short distances and with drought. A licensed water well driller can tell you what to expect on a specific tract.

Read the full methodology · Download the data (CSV, CC BY 4.0)

How to cite

TerraFunded (2026). Texas Well Atlas: Underground. From Texas Water Development Board driller reports and groundwater availability models (data as of November 10, 2026). https://terrafunded.com/wells/places/hamshire-tx. License CC BY 4.0. https://doi.org/10.5281/zenodo.24126380.

Sources