Skip to content
ENES
Marketplace

How deep are water wells in Grape Creek, Texas?

Home water wells in and around Grape Creek, Texas are typically 95 to 114 feet deep (median 100 ft, 47 wells drilled in the last 10 years). Estimated cost of a complete well at the median depth: $5,000 to $12,500.

Updated every day from Texas Water Development Board driller reports. Last update: November 11, 2026, using the state file of November 10, 2026.

See the wells and layers at an exact pointTom Green County
What is under Grape Creek, TexasUnderground column at the center of Grape Creek: median well 100 ft, middle half 95 to 114 ft, water at 50 ft.No state layer model here yet050100150ftGround levelMedian well: 100 ftWater standing in the well from 50 ftWater level50 ftMiddle half95–114 ftMedian well100 ft

Under Grape Creek, Tom Green County

The well and the water are the median of 47 real wells. This atlas does not have a state layer model for this area yet.

Home wells in and around Grape Creek

Each dot is a home well from a state driller report, colored by depth. Tap one for its details and official report. Tap an empty spot to see what is under that point.

See underground

Well depth (ft)

  • <100
  • 100
  • 200
  • 300
  • 400
  • 600
  • 800+

Dashed line: Grape Creek and about 2 miles around it

Key figures

Typical depth (middle half)
95 to 114 feet
Median depth
100 feet
Deepest 10% are past
137 feet
Water level (median)
50 feet
29 wells
Yield (median)
8 gpm
23 wells, gallons per minute
Wells used
47
In the last 10 years
Inside the city limits
60
the rest within 2 miles
All years on file
114
median 104 ft, since 2001
Confidence
Standard (30 or more wells)

When the wells were finished, the water stood a median 50 feet below the surface (29 wells).

What is under Grape Creek, TexasUnderground column at the center of Grape Creek: median well 100 ft, middle half 95 to 114 ft, water at 50 ft.No state layer model here yet050100150ftGround levelMedian well: 100 ftWater standing in the well from 50 ftWater level50 ftMiddle half95–114 ftMedian well100 ft
The well and the water are the median of 47 real wells. This atlas does not have a state layer model for this area yet.

Which formation do wells in Grape Creek draw from?

We cannot say yet for Grape Creek. This atlas assigns layers with the TWDB layered models processed so far (the Northern Trinity and Woodbine model, the Hill Country Trinity model, the northern Gulf Coast Aquifer model and the High Plains Aquifer System model), and none covers this area with enough wells. The depth, water level and yield on this page do come from the real wells here.

See the aquifers mapped under Tom Green County

Depth over time

There are not enough wells in both 2003 to 2007 and 2021 to 2025 (at least 30 in each) to say with confidence whether wells in and around Grape Creek are getting deeper. For reference, the median was 102 feet in 2001 to 2005 (22 wells) and 100 feet in 2021 to 2025 (32 wells).

PeriodMedian depth (ft)Wells
2001–200510222
2006–2010under 10 wells5
2011–201510236
2016–202010019
2021–202510032

What a well costs in Grape Creek

At the median depth for Grape Creek (100 feet), a complete home well would cost roughly $5,000 to $12,500: $25 to $60 per foot for drilling, casing and seal, plus $2,500 to $6,500 for the pump, pressure tank, controls and hookup at the well. Across the whole middle half of depths (95 to 114 feet) the range runs from $5,000 to $13,500. This is TerraFunded's estimate from published Texas prices, not a quote, and it leaves out trenching and the line to the house. Get prices from at least two licensed drillers.

Where it sits

Nearby places

Median depth of home wells in each place.

All Texas cities and towns

Common questions

How deep do you have to drill a well in Grape Creek, Texas?

Home water wells in and around Grape Creek, Texas are typically 95 to 114 feet deep (median 100 ft, 47 wells drilled in the last 10 years). One in ten goes past 137 feet. The depth a given tract needs depends on where it sits and what layers the driller hits.

How much does a water well cost in Grape Creek?

At the median depth (100 feet), a complete well would cost roughly $5,000 to $12,500, by TerraFunded's estimate from published Texas driller prices. The real price comes from a licensed driller's quote.

How deep is the water in Grape Creek?

When the wells were finished, the water stood a median 50 feet below the surface (29 wells). The level moves with drought and from one well to the next.

Do I need a permit to drill a well in Grape Creek?

Grape Creek is inside the Lipan-Kickapoo Water Conservation District. Groundwater conservation districts in Texas can require registering or permitting a new well, keeping set distances from property lines and other wells, and paying fees. Rules differ from district to district: ask the district before drilling.

How these numbers are made

We count new and replacement domestic (home) wells whose coordinates fall inside the place boundary or within 2 miles of it. We use the last 10 years when there are at least 30 wells; otherwise all since 2001. The median is the middle well and the middle half runs from the 25th to the 75th percentile.

These are depths of real wells drilled nearby, not a promise about any property. Groundwater can change over short distances and with drought. A licensed water well driller can tell you what to expect on a specific tract.

Read the full methodology · Download the data (CSV, CC BY 4.0)

How to cite

TerraFunded (2026). Texas Well Atlas: Underground. From Texas Water Development Board driller reports and groundwater availability models (data as of November 10, 2026). https://terrafunded.com/wells/places/grape-creek-tx. License CC BY 4.0. https://doi.org/10.5281/zenodo.24126380.

Sources