Skip to content
ENES
Marketplace

How deep are water wells in Sandy Oaks, Texas?

Home water wells in and around Sandy Oaks, Texas are typically 400 to 494 feet deep (median 445 ft, 30 wells drilled in the last 10 years). Estimated cost of a complete well at the median depth: $13,500 to $33,000.

Updated every day from Texas Water Development Board driller reports. Last update: November 11, 2026, using the state file of November 10, 2026.

See the wells and layers at an exact pointBexar County
What is under Sandy Oaks, TexasUnderground column at the center of Sandy Oaks: median well 445 ft, middle half 400 to 494 ft, water at 212 ft.No state layer model here yet0200400600ftGround levelMedian well: 445 ftWater standing in the well from 212 ftWater level212 ftMiddle half400–494 ftMedian well445 ft

Under Sandy Oaks, Bexar County

The well and the water are the median of 30 real wells. This atlas does not have a state layer model for this area yet.

Home wells in and around Sandy Oaks

Each dot is a home well from a state driller report, colored by depth. Tap one for its details and official report. Tap an empty spot to see what is under that point.

See underground

Well depth (ft)

  • <100
  • 100
  • 200
  • 300
  • 400
  • 600
  • 800+

Dashed line: Sandy Oaks and about 2 miles around it

Key figures

Typical depth (middle half)
400 to 494 feet
Median depth
445 feet
Deepest 10% are past
509 feet
Water level (median)
212 feet
27 wells
Yield (median)
45 gpm
28 wells, gallons per minute
Wells used
30
In the last 10 years
Inside the city limits
0
the rest within 2 miles
All years on file
69
median 464 ft, since 2004
Confidence
Standard (30 or more wells)

When the wells were finished, the water stood a median 212 feet below the surface (27 wells).

What is under Sandy Oaks, TexasUnderground column at the center of Sandy Oaks: median well 445 ft, middle half 400 to 494 ft, water at 212 ft.No state layer model here yet0200400600ftGround levelMedian well: 445 ftWater standing in the well from 212 ftWater level212 ftMiddle half400–494 ftMedian well445 ft
The well and the water are the median of 30 real wells. This atlas does not have a state layer model for this area yet.

Which formation do wells in Sandy Oaks draw from?

We cannot say yet for Sandy Oaks. This atlas assigns layers with the TWDB layered models processed so far (the Northern Trinity and Woodbine model, the Hill Country Trinity model, the northern Gulf Coast Aquifer model and the High Plains Aquifer System model), and none covers this area with enough wells. The depth, water level and yield on this page do come from the real wells here.

See the aquifers mapped under Bexar County

Depth over time

There are not enough wells in both 2003 to 2007 and 2021 to 2025 (at least 30 in each) to say with confidence whether wells in and around Sandy Oaks are getting deeper. For reference, the median was 458 feet in 2001 to 2005 (18 wells) and 445 feet in 2021 to 2025 (20 wells).

PeriodMedian depth (ft)Wells
2001–200545818
2006–201049212
2011–2015under 10 wells9
2016–2020under 10 wells9
2021–202544520
2026under 10 wells1

What a well costs in Sandy Oaks

At the median depth for Sandy Oaks (445 feet), a complete home well would cost roughly $13,500 to $33,000: $25 to $60 per foot for drilling, casing and seal, plus $2,500 to $6,500 for the pump, pressure tank, controls and hookup at the well. Across the whole middle half of depths (400 to 494 feet) the range runs from $12,500 to $36,000. This is TerraFunded's estimate from published Texas prices, not a quote, and it leaves out trenching and the line to the house. Get prices from at least two licensed drillers.

Where it sits

Nearby places

Median depth of home wells in each place.

All Texas cities and towns

Common questions

How deep do you have to drill a well in Sandy Oaks, Texas?

Home water wells in and around Sandy Oaks, Texas are typically 400 to 494 feet deep (median 445 ft, 30 wells drilled in the last 10 years). One in ten goes past 509 feet. The depth a given tract needs depends on where it sits and what layers the driller hits.

How much does a water well cost in Sandy Oaks?

At the median depth (445 feet), a complete well would cost roughly $13,500 to $33,000, by TerraFunded's estimate from published Texas driller prices. The real price comes from a licensed driller's quote.

How deep is the water in Sandy Oaks?

When the wells were finished, the water stood a median 212 feet below the surface (27 wells). The level moves with drought and from one well to the next.

Do I need a permit to drill a well in Sandy Oaks?

Sandy Oaks is inside the Edwards Aquifer Authority. Groundwater conservation districts in Texas can require registering or permitting a new well, keeping set distances from property lines and other wells, and paying fees. Rules differ from district to district: ask the district before drilling.

How these numbers are made

We count new and replacement domestic (home) wells whose coordinates fall inside the place boundary or within 2 miles of it. We use the last 10 years when there are at least 30 wells; otherwise all since 2001. The median is the middle well and the middle half runs from the 25th to the 75th percentile.

These are depths of real wells drilled nearby, not a promise about any property. Groundwater can change over short distances and with drought. A licensed water well driller can tell you what to expect on a specific tract.

Read the full methodology · Download the data (CSV, CC BY 4.0)

How to cite

TerraFunded (2026). Texas Well Atlas: Underground. From Texas Water Development Board driller reports and groundwater availability models (data as of November 10, 2026). https://terrafunded.com/wells/places/sandy-oaks-tx. License CC BY 4.0. https://doi.org/10.5281/zenodo.24126380.

Sources