Skip to content
ENES
Marketplace

How deep are water wells in Quail Creek, Texas?

Home water wells in and around Quail Creek, Texas are typically 122 to 175 feet deep (median 142 ft, 99 wells drilled in the last 10 years). Estimated cost of a complete well at the median depth: $6,000 to $15,000.

Updated every day from Texas Water Development Board driller reports. Last update: November 11, 2026, using the state file of November 10, 2026.

See the wells and layers at an exact pointVictoria County
What is under Quail Creek, TexasUnderground column at the center of Quail Creek: median well 142 ft, middle half 122 to 175 ft, water at 52 ft.No state layer model here yet050100150200250ftGround levelMedian well: 142 ftWater standing in the well from 52 ftWater level52 ftMiddle half122–175 ftMedian well142 ft

Under Quail Creek, Victoria County

The well and the water are the median of 99 real wells. This atlas does not have a state layer model for this area yet.

Home wells in and around Quail Creek

Each dot is a home well from a state driller report, colored by depth. Tap one for its details and official report. Tap an empty spot to see what is under that point.

See underground

Well depth (ft)

  • <100
  • 100
  • 200
  • 300
  • 400
  • 600
  • 800+

Dashed line: Quail Creek and about 2 miles around it

Key figures

Typical depth (middle half)
122 to 175 feet
Median depth
142 feet
Deepest 10% are past
211 feet
Water level (median)
52 feet
97 wells
Yield (median)
40 gpm
97 wells, gallons per minute
Wells used
99
In the last 10 years
Inside the city limits
32
the rest within 2 miles
All years on file
353
median 150 ft, since 2001
Confidence
Standard (30 or more wells)

When the wells were finished, the water stood a median 52 feet below the surface (97 wells), well above the bottom: the typical well holds about 90 feet of water.

What is under Quail Creek, TexasUnderground column at the center of Quail Creek: median well 142 ft, middle half 122 to 175 ft, water at 52 ft.No state layer model here yet050100150200250ftGround levelMedian well: 142 ftWater standing in the well from 52 ftWater level52 ftMiddle half122–175 ftMedian well142 ft
The well and the water are the median of 99 real wells. This atlas does not have a state layer model for this area yet.

Which formation do wells in Quail Creek draw from?

We cannot say yet for Quail Creek. This atlas assigns layers with the TWDB layered models processed so far (the Northern Trinity and Woodbine model, the Hill Country Trinity model, the northern Gulf Coast Aquifer model and the High Plains Aquifer System model), and none covers this area with enough wells. The depth, water level and yield on this page do come from the real wells here.

See the aquifers mapped under Victoria County

Depth over time

Home well depth in and around Quail Creek has not changed meaningfully in 20 years: the median was 150 feet in 2003 to 2007 and 142 feet in 2021 to 2025 (a difference under 10% or within the margin of error).

PeriodMedian depth (ft)Wells
2001–200514886
2006–201015488
2011–201516570
2016–202014045
2021–202514258
2026under 10 wells6

What a well costs in Quail Creek

At the median depth for Quail Creek (142 feet), a complete home well would cost roughly $6,000 to $15,000: $25 to $60 per foot for drilling, casing and seal, plus $2,500 to $6,500 for the pump, pressure tank, controls and hookup at the well. Across the whole middle half of depths (122 to 175 feet) the range runs from $5,500 to $17,000. This is TerraFunded's estimate from published Texas prices, not a quote, and it leaves out trenching and the line to the house. Get prices from at least two licensed drillers.

Where it sits

Nearby places

Median depth of home wells in each place.

All Texas cities and towns

Common questions

How deep do you have to drill a well in Quail Creek, Texas?

Home water wells in and around Quail Creek, Texas are typically 122 to 175 feet deep (median 142 ft, 99 wells drilled in the last 10 years). One in ten goes past 211 feet. The depth a given tract needs depends on where it sits and what layers the driller hits.

How much does a water well cost in Quail Creek?

At the median depth (142 feet), a complete well would cost roughly $6,000 to $15,000, by TerraFunded's estimate from published Texas driller prices. The real price comes from a licensed driller's quote.

How deep is the water in Quail Creek?

When the wells were finished, the water stood a median 52 feet below the surface (97 wells), well above the bottom: the typical well holds about 90 feet of water. The level moves with drought and from one well to the next.

Do I need a permit to drill a well in Quail Creek?

Quail Creek is inside the Victoria County Groundwater Conservation District. Groundwater conservation districts in Texas can require registering or permitting a new well, keeping set distances from property lines and other wells, and paying fees. Rules differ from district to district: ask the district before drilling.

How these numbers are made

We count new and replacement domestic (home) wells whose coordinates fall inside the place boundary or within 2 miles of it. We use the last 10 years when there are at least 30 wells; otherwise all since 2001. The median is the middle well and the middle half runs from the 25th to the 75th percentile.

These are depths of real wells drilled nearby, not a promise about any property. Groundwater can change over short distances and with drought. A licensed water well driller can tell you what to expect on a specific tract.

Read the full methodology · Download the data (CSV, CC BY 4.0)

How to cite

TerraFunded (2026). Texas Well Atlas: Underground. From Texas Water Development Board driller reports and groundwater availability models (data as of November 10, 2026). https://terrafunded.com/wells/places/quail-creek-tx. License CC BY 4.0. https://doi.org/10.5281/zenodo.24126380.

Sources