How deep are water wells in Pine Island, Texas?
Home water wells in and around Pine Island, Texas are typically 198 to 275 feet deep (median 240 ft, 114 wells drilled in the last 10 years). No single layer dominates: 52% draw from the Evangeline Aquifer and 48% from the Chicot Aquifer, according to the state's northern Gulf Coast Aquifer model (TWDB). The split between the Chicot and the Evangeline is approximate. Estimated cost of a complete well at the median depth: $8,500 to $21,000.
Updated every day from Texas Water Development Board driller reports. Last update: November 11, 2026, using the state file of November 10, 2026.
Under Pine Island, Waller County
Layers at the center of Pine Island from TWDB's northern Gulf Coast Aquifer model (cells of about 0.62 mile (1 km)), at true depth scale. The well and the water are the median of 114 real wells.
Digging in…
Home wells in and around Pine Island
Each dot is a home well from a state driller report, colored by depth. Tap one for its details and official report. Tap an empty spot to see what is under that point.
Well depth (ft)
- <100
- 100
- 200
- 300
- 400
- 600
- 800+
Dashed line: Pine Island and about 2 miles around it
Green: aquifer mapped by the state
Key figures
- Typical depth (middle half)
- 198 to 275 feet
- Median depth
- 240 feet
- Deepest 10% are past
- 342 feet
- Water level (median)
- 90 feet
- 110 wells
- Yield (median)
- 40 gpm
- 108 wells, gallons per minute
- Wells used
- 114
- In the last 10 years
- Inside the city limits
- 96
- the rest within 2 miles
- All years on file
- 384
- median 230 ft, since 1999
- Confidence
- Standard (30 or more wells)
When the wells were finished, the water stood a median 90 feet below the surface (110 wells), well above the bottom: the typical well holds about 150 feet of water.
Which formation do wells in Pine Island draw from?
No single layer dominates: 52% draw from the Evangeline Aquifer and 48% from the Chicot Aquifer, according to the state's northern Gulf Coast Aquifer model (TWDB). The line between the Chicot and the Evangeline is drawn differently by different studies, so read that split as approximate: of the wells the state records in the Evangeline, our method finds the Evangeline for only about 51% and the Chicot for most of the rest.
| Layer (state's model) | Share | Wells | Typical depth (ft) |
|---|---|---|---|
| Evangeline | 52% | 59 | 200–302 |
| Chicot | 48% | 55 | 194–244 |
For 97% of these wells the report says where the water enters (the screen or the open hole), and we use the middle of that interval.
The layers under the center of Pine Island
From the state's model, at 223 feet above sea level. These are the model's depths at that one point, not those of any particular lot.
| Layer (state's model) | Top (ft) | Bottom (ft) | Thickness (ft) |
|---|---|---|---|
| Chicotsand, silt and clay | 0 | 214 | 214 |
| Evangelinesand and clay | 214 | 969 | 755 |
| Jasper, Catahoula and Burkevillesand, sandstone, clay and volcanic tuff | 969 | 3,459 | 2,490 |
Depth over time
Home well depth in and around Pine Island has not changed meaningfully in 20 years: the median was 220 feet in 2003 to 2007 and 244 feet in 2021 to 2025 (a difference under 10% or within the margin of error).
| Period | Median depth (ft) | Wells |
|---|---|---|
| 2001–2005 | 224 | 92 |
| 2006–2010 | 230 | 87 |
| 2011–2015 | 232 | 72 |
| 2016–2020 | 238 | 49 |
| 2021–2025 | 244 | 64 |
| 2026 | 225 | 10 |
What a well costs in Pine Island
At the median depth for Pine Island (240 feet), a complete home well would cost roughly $8,500 to $21,000: $25 to $60 per foot for drilling, casing and seal, plus $2,500 to $6,500 for the pump, pressure tank, controls and hookup at the well. Across the whole middle half of depths (198 to 275 feet) the range runs from $7,500 to $23,000. This is TerraFunded's estimate from published Texas prices, not a quote, and it leaves out trenching and the line to the house. Get prices from at least two licensed drillers.
Where it sits
- Wells in Waller County
- Bluebonnet Groundwater Conservation District (groundwater district)
- Town · 30.0554, -96.0253
Nearby places
Median depth of home wells in each place.
- Prairie View 244 ft
- Hempstead 255 ft
- Waller 240 ft
- Bellville 240 ft
- Pattison 220 ft
- Todd Mission 250 ft
Common questions
How deep do you have to drill a well in Pine Island, Texas?
Home water wells in and around Pine Island, Texas are typically 198 to 275 feet deep (median 240 ft, 114 wells drilled in the last 10 years). One in ten goes past 342 feet. The depth a given tract needs depends on where it sits and what layers the driller hits.
What aquifer or formation do wells in Pine Island draw from?
No single layer dominates: 52% draw from the Evangeline Aquifer and 48% from the Chicot Aquifer, according to the state's northern Gulf Coast Aquifer model (TWDB). The line between the Chicot and the Evangeline is drawn differently by different studies, so read that split as approximate: of the wells the state records in the Evangeline, our method finds the Evangeline for only about 51% and the Chicot for most of the rest. This is an estimate from the state's regional model, not a survey of the lot.
How much does a water well cost in Pine Island?
At the median depth (240 feet), a complete well would cost roughly $8,500 to $21,000, by TerraFunded's estimate from published Texas driller prices. The real price comes from a licensed driller's quote.
How deep is the water in Pine Island?
When the wells were finished, the water stood a median 90 feet below the surface (110 wells), well above the bottom: the typical well holds about 150 feet of water. The level moves with drought and from one well to the next.
Do I need a permit to drill a well in Pine Island?
Pine Island is inside the Bluebonnet Groundwater Conservation District. Groundwater conservation districts in Texas can require registering or permitting a new well, keeping set distances from property lines and other wells, and paying fees. Rules differ from district to district: ask the district before drilling.
How these numbers are made
We count new and replacement domestic (home) wells whose coordinates fall inside the place boundary or within 2 miles of it. We use the last 10 years when there are at least 30 wells; otherwise all since 2001. The median is the middle well and the middle half runs from the 25th to the 75th percentile.
To tell which layer a well draws from, we take the ground elevation at its location, subtract the depth of the interval where water enters (or the bottom of the hole when the report does not give one) and see which layer of the state's model that point falls in.
For 97% of these wells the report says where the water enters (the screen or the open hole), and we use the middle of that interval.
How well it works: In 14,333 wells in the area of the state's northern Gulf Coast Aquifer model (Houston and Southeast Texas) where the State of Texas recorded the aquifer, the formation our method says the well draws from (as grouped on these pages) is the one the state recorded in about 83% of them, and that formation or the one next to it in at least 99%; of the 3,578 of those wells that the state records in the Evangeline, it names the Evangeline for about 51% and the Chicot for most of the rest.
- The layers come from the Texas Water Development Board's northern Gulf Coast Aquifer model, with cells of about 0.62 mile (1 km). It is a regional model, not a survey of any lot.
- The state's model has cells of about 3,277 ft (1 km, 0.62 mile); we read it on a grid of about 0.6 by 0.7 miles. It is not a survey of any lot, so we give ranges.
- Figures go by three groups: Chicot, Evangeline, and Jasper and Catahoula with the Burkeville. The state's records cannot tell the Burkeville, the Jasper and the Catahoula apart at a well (alone, the Burkeville matched 33% and the Catahoula 50%), so they are never named one by one as the formation of a well or a place.
- The line between the Chicot and the Evangeline is drawn differently by different studies. The state's records put about half of their Evangeline wells in what the model draws as the Chicot, mostly deeper wells in Harris, Montgomery, Waller, Liberty and Austin counties. Where both appear, the split is approximate.
- "Near or below the base" means the well ends near or below the base of the Gulf Coast Aquifer (under the Catahoula: Jackson Group, Yegua and older). It is 1.3% of home wells; half of them end within about 85 ft of the base. That is not an error: the model simply ends there.
- The model's top layer is a uniform 49 ft slab for the water table zone, not a rock unit; we merge it into the unit beneath. The model also covers Colorado, Lavaca, Fayette, Wharton and Matagorda counties (outside Groundwater Management Area 14), with the same framework. Texas part only.
- We never use the model's water levels. The water level on this page is the one each driller measured when the well was finished.
These are depths of real wells drilled nearby, not a promise about any property. Groundwater can change over short distances and with drought. A licensed water well driller can tell you what to expect on a specific tract.
Read the full methodology · Download the data (CSV, CC BY 4.0)
How to cite
TerraFunded (2026). Texas Well Atlas: Underground. From Texas Water Development Board driller reports and groundwater availability models (data as of November 10, 2026). https://terrafunded.com/wells/places/pine-island-tx. License CC BY 4.0. https://doi.org/10.5281/zenodo.24126380.
Sources
- Submitted Driller's Reports database, Texas Water Development Board (TWDB) (file of November 10, 2026)
- Northern Portion of the Gulf Coast Aquifer System Groundwater Availability Model for Groundwater Management Area 14 Joint Planning (GMA 14 Model). Keester, M.R., Webster, P., Beach, J., Drabek, C., and Chen, Y.H. (KT Groundwater and Advanced Groundwater Solutions), for Groundwater Management Area 14, in cooperation with Lone Star Groundwater Conservation District; layer elevations from GULF-2023 (Ellis and others, 2023, U.S. Geological Survey), 2025, GAM v4.1. TWDB groundwater availability model.
- Texas place boundaries, U.S. Census Bureau (2023 cartographic boundary file)
- Ground elevation: Terrain Tiles (Mapzen), Registry of Open Data on AWS
- TWDB well report viewer (each well's official report)
