How deep are water wells in Perrin, Texas?

Q: How much does a water well cost in Perrin?

At the median depth (280 feet), a complete well would cost roughly $9,500 to $23,500, by TerraFunded's estimate from published Texas driller prices. The real price comes from a licensed driller's quote.

Q: Do I need a permit to drill a well in Perrin?

In the state's boundary file (current as of November 2019) no groundwater conservation district covers Perrin. Districts created or enlarged since then are missing from that file, so confirm with the county or TWDB before drilling. Anywhere in Texas the well must be drilled by a licensed driller, who files the report with the state.

Home water wells in and around Perrin, Texas are typically 200 to 300 feet deep (median 280 ft, 54 wells drilled in the last 10 years). Estimated cost of a complete well at the median depth: $9,500 to $23,500.

Updated every day from Texas Water Development Board driller reports. Last update: November 11, 2026, using the state file of November 10, 2026.

See the wells and layers at an exact point Jack County

Under Perrin, Jack County

The well and the water are the median of 54 real wells. This atlas does not have a state layer model for this area yet.

Home wells in and around Perrin

Each dot is a home well from a state driller report, colored by depth. Tap one for its details and official report. Tap an empty spot to see what is under that point.

See underground

Well depth (ft)

<100
100
200
300
400
600
800+

Dashed line: Perrin and about 2 miles around it

Key figures

Typical depth (middle half): 200 to 300 feet
Median depth: 280 feet
Deepest 10% are past: 300 feet
Yield (median): 25 gpm; 38 wells, gallons per minute
Wells used: 54; In the last 10 years
Inside the city limits: 23; the rest within 2 miles
All years on file: 90; median 240 ft, since 2001
Confidence: Standard (30 or more wells)

The well and the water are the median of 54 real wells. This atlas does not have a state layer model for this area yet.

Which formation do wells in Perrin draw from?

We cannot say yet for Perrin. This atlas assigns layers with the TWDB layered models processed so far (the Northern Trinity and Woodbine model, the Hill Country Trinity model, the northern Gulf Coast Aquifer model and the High Plains Aquifer System model), and none covers this area with enough wells. The depth, water level and yield on this page do come from the real wells here.

See the aquifers mapped under Jack County

Depth over time

There are not enough wells in both 2003 to 2007 and 2021 to 2025 (at least 30 in each) to say with confidence whether wells in and around Perrin are getting deeper. For reference, the median was 180 feet in 2001 to 2005 (10 wells) and 260 feet in 2021 to 2025 (37 wells).

Period	Median depth (ft)	Wells
2001–2005	180	10
2006–2010	200	12
2011–2015	240	13
2016–2020	280	13
2021–2025	260	37
2026	under 10 wells	5

What a well costs in Perrin

At the median depth for Perrin (280 feet), a complete home well would cost roughly $9,500 to $23,500: $25 to $60 per foot for drilling, casing and seal, plus $2,500 to $6,500 for the pump, pressure tank, controls and hookup at the well. Across the whole middle half of depths (200 to 300 feet) the range runs from $7,500 to $24,500. This is TerraFunded's estimate from published Texas prices, not a quote, and it leaves out trenching and the line to the house. Get prices from at least two licensed drillers.

Where it sits

Wells in Jack County
Unincorporated community (Census-designated place) · 33.0349, -98.0692

Nearby places

Median depth of home wells in each place.

Graford 160 ft
Jacksboro 240 ft
Mineral Wells 240 ft
Runaway Bay 160 ft
Garner 200 ft
Cool 220 ft

All Texas cities and towns

Common questions

How deep do you have to drill a well in Perrin, Texas?

Home water wells in and around Perrin, Texas are typically 200 to 300 feet deep (median 280 ft, 54 wells drilled in the last 10 years). One in ten goes past 300 feet. The depth a given tract needs depends on where it sits and what layers the driller hits.

How much does a water well cost in Perrin?

At the median depth (280 feet), a complete well would cost roughly $9,500 to $23,500, by TerraFunded's estimate from published Texas driller prices. The real price comes from a licensed driller's quote.

Do I need a permit to drill a well in Perrin?

In the state's boundary file (current as of November 2019) no groundwater conservation district covers Perrin. Districts created or enlarged since then are missing from that file, so confirm with the county or TWDB before drilling. Anywhere in Texas the well must be drilled by a licensed driller, who files the report with the state.

How these numbers are made

We count new and replacement domestic (home) wells whose coordinates fall inside the place boundary or within 2 miles of it. We use the last 10 years when there are at least 30 wells; otherwise all since 2001. The median is the middle well and the middle half runs from the 25th to the 75th percentile.

These are depths of real wells drilled nearby, not a promise about any property. Groundwater can change over short distances and with drought. A licensed water well driller can tell you what to expect on a specific tract.

Read the full methodology · Download the data (CSV, CC BY 4.0)

How to cite

TerraFunded (2026). Texas Well Atlas: Underground. From Texas Water Development Board driller reports and groundwater availability models (data as of November 10, 2026). https://terrafunded.com/wells/places/perrin-tx. License CC BY 4.0. https://doi.org/10.5281/zenodo.24126380.