Skip to content
ENES
Marketplace

How deep are water wells in Opdyke West, Texas?

Home water wells in and around Opdyke West, Texas are consistently 150 to 168 feet deep (median 160 ft, 48 wells drilled in the last 10 years). Nearly all draw from the Ogallala Aquifer (90%), according to the state's High Plains Aquifer System model (TWDB). Estimated cost of a complete well at the median depth: $6,500 to $16,000.

Updated every day from Texas Water Development Board driller reports. Last update: November 11, 2026, using the state file of November 10, 2026.

See the wells and layers at an exact pointHockley County
What is under Opdyke West, TexasUnderground column at the center of Opdyke West: median well 160 ft, middle half 150 to 168 ft, and the layers of the state's model with their thickness.Ogallala: 0 to 150 ftOgallalaEdwards-Trinity (High Plains): 150 to 346 ftEdwards-Trinity (High…continues to 1,961 ft050100150200ftGround level · 3,471 ft above sea levelMedian well: 160 ftMiddle half150–168 ftMedian well160 ft

Under Opdyke West, Hockley County

Layers at the center of Opdyke West from TWDB's High Plains Aquifer System model (half mile cells, read here on a grid of about 1.2 by 1.4 miles), at true depth scale. The well and the water are the median of 48 real wells.

Home wells in and around Opdyke West

Each dot is a home well from a state driller report, colored by depth. Tap one for its details and official report. Tap an empty spot to see what is under that point.

See underground

Well depth (ft)

  • <100
  • 100
  • 200
  • 300
  • 400
  • 600
  • 800+

Dashed line: Opdyke West and about 2 miles around it

Key figures

Typical depth (middle half)
150 to 168 feet
Median depth
160 feet
Deepest 10% are past
174 feet
Wells used
48
In the last 10 years
Inside the city limits
0
the rest within 2 miles
All years on file
80
median 162 ft, since 2003
Confidence
Standard (30 or more wells)
What is under Opdyke West, TexasUnderground column at the center of Opdyke West: median well 160 ft, middle half 150 to 168 ft, and the layers of the state's model with their thickness.Ogallala: 0 to 150 ftOgallalaEdwards-Trinity (High Plains): 150 to 346 ftEdwards-Trinity (High…continues to 1,961 ft050100150200ftGround level · 3,471 ft above sea levelMedian well: 160 ftMiddle half150–168 ftMedian well160 ft
Layers at the center of Opdyke West from TWDB's High Plains Aquifer System model (half mile cells, read here on a grid of about 1.2 by 1.4 miles), at true depth scale. The well and the water are the median of 48 real wells.

Which formation do wells in Opdyke West draw from?

Nearly all draw from the Ogallala Aquifer (90%), according to the state's High Plains Aquifer System model (TWDB).

The bottom of the hole tells a different story: 90% reach the Edwards-Trinity (High Plains) Aquifer, although only 10% take their water from it. Many drillers go past the producing layer to leave a reserve.

Layer (state's model)ShareWellsTypical depth (ft)
Ogallala90%43150–168
Edwards-Trinity (High Plains)10%5155–170

For 100% of these wells the report says where the water enters (the screen or the open hole), and we use the middle of that interval.

The layers under the center of Opdyke West

From the state's model, at 3,471 feet above sea level. These are the model's depths at that one point, not those of any particular lot.

Depths in feet below ground.
Layer (state's model)Top (ft)Bottom (ft)Thickness (ft)
Ogallalasand, gravel, silt and caliche0150150
Edwards-Trinity (High Plains)sand, sandstone and limestone150346196
Dockumred mudstone, sandstone and conglomerate3461,9611,614

Depth over time

There are not enough wells in both 2003 to 2007 and 2021 to 2025 (at least 30 in each) to say with confidence whether wells in and around Opdyke West are getting deeper. For reference, the median was 164 feet in 2006 to 2010 (14 wells) and 160 feet in 2021 to 2025 (32 wells).

PeriodMedian depth (ft)Wells
2001–2005under 10 wells8
2006–201016414
2011–2015under 10 wells9
2016–202015412
2021–202516032
2026under 10 wells5

What a well costs in Opdyke West

At the median depth for Opdyke West (160 feet), a complete home well would cost roughly $6,500 to $16,000: $25 to $60 per foot for drilling, casing and seal, plus $2,500 to $6,500 for the pump, pressure tank, controls and hookup at the well. Across the whole middle half of depths (150 to 168 feet) the range runs from $6,500 to $16,500. This is TerraFunded's estimate from published Texas prices, not a quote, and it leaves out trenching and the line to the house. Get prices from at least two licensed drillers.

Where it sits

Nearby places

Median depth of home wells in each place.

All Texas cities and towns

Common questions

How deep do you have to drill a well in Opdyke West, Texas?

Home water wells in and around Opdyke West, Texas are consistently 150 to 168 feet deep (median 160 ft, 48 wells drilled in the last 10 years). One in ten goes past 174 feet. The depth a given tract needs depends on where it sits and what layers the driller hits.

What aquifer or formation do wells in Opdyke West draw from?

Nearly all draw from the Ogallala Aquifer (90%), according to the state's High Plains Aquifer System model (TWDB). This is an estimate from the state's regional model, not a survey of the lot.

How much does a water well cost in Opdyke West?

At the median depth (160 feet), a complete well would cost roughly $6,500 to $16,000, by TerraFunded's estimate from published Texas driller prices. The real price comes from a licensed driller's quote.

Do I need a permit to drill a well in Opdyke West?

Opdyke West is inside the High Plains Underground Water Conservation District No. 1. Groundwater conservation districts in Texas can require registering or permitting a new well, keeping set distances from property lines and other wells, and paying fees. Rules differ from district to district: ask the district before drilling.

How these numbers are made

We count new and replacement domestic (home) wells whose coordinates fall inside the place boundary or within 2 miles of it. We use the last 10 years when there are at least 30 wells; otherwise all since 2001. The median is the middle well and the middle half runs from the 25th to the 75th percentile.

To tell which layer a well draws from, we take the ground elevation at its location, subtract the depth of the interval where water enters (or the bottom of the hole when the report does not give one) and see which layer of the state's model that point falls in.

For 100% of these wells the report says where the water enters (the screen or the open hole), and we use the middle of that interval.

How well it works: In 22,814 wells in the Texas part of the state's High Plains Aquifer System model (the Panhandle, the South Plains and the Permian Basin) where the State of Texas recorded the aquifer, the formation our method says the well draws from (as grouped on these pages) is the one the state recorded in about 75% of them; when it names the Dockum (4,542 wells), the state's record agrees only about 33% of the time, and most of the others are recorded as Ogallala wells.

  • The layers come from the Texas Water Development Board's High Plains Aquifer System model, with half mile cells, read here on a grid of about 1.2 by 1.4 miles. It is a regional model, not a survey of any lot.
  • The state's model has half mile cells; we read it on a grid of about 1.2 by 1.4 miles, Texas part only. Layers from version 1.01 (2015); the 2025 extension (1.02) did not change them. It is not a survey of any lot, so we give ranges.
  • Figures go by four groups: Ogallala; Pecos Valley; Edwards-Trinity and Rita Blanca (Cretaceous rock under the Ogallala; the Rita Blanca alone matched the state 19%); Dockum (upper and lower together: the state's codes almost never say which). The Edwards-Trinity group joins three aquifers in different places (High Plains around Lubbock, Plateau around Midland and Odessa, Rita Blanca in Dallam and Hartley): county and place pages name the local one where they can.
  • Dockum: when our method names the Dockum, the state's record agrees only 33% of the time over all years (61% for wells with a screened interval, which is 93% of home wells of the last 10 years); most of the rest are recorded as Ogallala wells. The median well we put in the Dockum ends about 18 ft under the base of the Ogallala as the model draws it. So these pages say "at or just below the base of the Ogallala, in the top of the Dockum", never a certain formation. The state's own 2025 report on this model says depth alone overstates the upper Dockum.
  • "Near or below the base" means the well ends near or below the base of the Dockum, or of the Ogallala where there is no Dockum (Permian red beds; Gray, Carson, Donley, Moore and north Potter counties). Half of these wells end within about 51 ft of the base, and the state usually records them as Ogallala or Dockum wells. That is not an error: the model simply ends there.
  • For old wells without a screened interval (bottom of the hole) the method is only a little better than always saying Ogallala (65% against 58%); with an interval it is 89% against 80%. Figures over all years carry that weakness; last 10 years figures rest almost entirely on intervals.
  • We never use the model's water levels. The water level on this page is the one each driller measured when the well was finished.

These are depths of real wells drilled nearby, not a promise about any property. Groundwater can change over short distances and with drought. A licensed water well driller can tell you what to expect on a specific tract.

Read the full methodology · Download the data (CSV, CC BY 4.0)

How to cite

TerraFunded (2026). Texas Well Atlas: Underground. From Texas Water Development Board driller reports and groundwater availability models (data as of November 10, 2026). https://terrafunded.com/wells/places/opdyke-west-tx. License CC BY 4.0. https://doi.org/10.5281/zenodo.24126380.

Sources