How deep are water wells in Kyle, Texas?

Q: How much does a water well cost in Kyle?

At the median depth (400 feet), a complete well would cost roughly $12,500 to $30,500, by TerraFunded's estimate from published Texas driller prices. The real price comes from a licensed driller's quote.

Q: How deep is the water in Kyle?

When the wells were finished, the water stood a median 231 feet below the surface (59 wells). The level moves with drought and from one well to the next.

Q: Do I need a permit to drill a well in Kyle?

Kyle is inside the Barton Springs/Edwards Aquifer Conservation District. Groundwater conservation districts in Texas can require registering or permitting a new well, keeping set distances from property lines and other wells, and paying fees. Rules differ from district to district: ask the district before drilling.

Home water wells in and around Kyle, Texas are typically 350 to 580 feet deep (median 400 ft, 61 wells drilled in the last 10 years). Estimated cost of a complete well at the median depth: $12,500 to $30,500.

Updated every day from Texas Water Development Board driller reports. Last update: November 11, 2026, using the state file of November 10, 2026.

See the wells and layers at an exact point Hays County

Under Kyle, Hays County

The well and the water are the median of 61 real wells. This atlas does not have a state layer model for this area yet.

Home wells in and around Kyle

Each dot is a home well from a state driller report, colored by depth. Tap one for its details and official report. Tap an empty spot to see what is under that point.

See underground

Well depth (ft)

<100
100
200
300
400
600
800+

Dashed line: Kyle and about 2 miles around it

Key figures

Typical depth (middle half): 350 to 580 feet
Median depth: 400 feet
Deepest 10% are past: 650 feet
Water level (median): 231 feet; 59 wells
Yield (median): 17.5 gpm; 40 wells, gallons per minute
Wells used: 61; In the last 10 years
Inside the city limits: 4; the rest within 2 miles
All years on file: 199; median 400 ft, since 1996
Confidence: Standard (30 or more wells)

When the wells were finished, the water stood a median 231 feet below the surface (59 wells).

The well and the water are the median of 61 real wells. This atlas does not have a state layer model for this area yet.

Which formation do wells in Kyle draw from?

We cannot say yet for Kyle. This atlas assigns layers with the TWDB layered models processed so far (the Northern Trinity and Woodbine model, the Hill Country Trinity model, the northern Gulf Coast Aquifer model and the High Plains Aquifer System model), and none covers this area with enough wells. The depth, water level and yield on this page do come from the real wells here.

See the aquifers mapped under Hays County

Depth over time

Home well depth in and around Kyle has not changed meaningfully in 20 years: the median was 460 feet in 2003 to 2007 and 400 feet in 2021 to 2025 (a difference under 10% or within the margin of error).

Period	Median depth (ft)	Wells
2001–2005	500	31
2006–2010	420	45
2011–2015	320	55
2016–2020	400	31
2021–2025	400	33
2026	under 10 wells	3

What a well costs in Kyle

At the median depth for Kyle (400 feet), a complete home well would cost roughly $12,500 to $30,500: $25 to $60 per foot for drilling, casing and seal, plus $2,500 to $6,500 for the pump, pressure tank, controls and hookup at the well. Across the whole middle half of depths (350 to 580 feet) the range runs from $11,500 to $41,500. This is TerraFunded's estimate from published Texas prices, not a quote, and it leaves out trenching and the line to the house. Get prices from at least two licensed drillers.

Where it sits

Wells in Hays County
Barton Springs/Edwards Aquifer Conservation District (groundwater district)
City · 29.9935, -97.8838

Nearby places

Median depth of home wells in each place.

Mountain City 400 ft
Buda 400 ft
Hays 400 ft
San Marcos 300 ft
Manchaca 400 ft
Martindale 40 ft

All Texas cities and towns

Common questions

How deep do you have to drill a well in Kyle, Texas?

Home water wells in and around Kyle, Texas are typically 350 to 580 feet deep (median 400 ft, 61 wells drilled in the last 10 years). One in ten goes past 650 feet. The depth a given tract needs depends on where it sits and what layers the driller hits.

How much does a water well cost in Kyle?

At the median depth (400 feet), a complete well would cost roughly $12,500 to $30,500, by TerraFunded's estimate from published Texas driller prices. The real price comes from a licensed driller's quote.

How deep is the water in Kyle?

When the wells were finished, the water stood a median 231 feet below the surface (59 wells). The level moves with drought and from one well to the next.

Do I need a permit to drill a well in Kyle?

Kyle is inside the Barton Springs/Edwards Aquifer Conservation District. Groundwater conservation districts in Texas can require registering or permitting a new well, keeping set distances from property lines and other wells, and paying fees. Rules differ from district to district: ask the district before drilling.

How these numbers are made

We count new and replacement domestic (home) wells whose coordinates fall inside the place boundary or within 2 miles of it. We use the last 10 years when there are at least 30 wells; otherwise all since 2001. The median is the middle well and the middle half runs from the 25th to the 75th percentile.

These are depths of real wells drilled nearby, not a promise about any property. Groundwater can change over short distances and with drought. A licensed water well driller can tell you what to expect on a specific tract.

Read the full methodology · Download the data (CSV, CC BY 4.0)

How to cite

TerraFunded (2026). Texas Well Atlas: Underground. From Texas Water Development Board driller reports and groundwater availability models (data as of November 10, 2026). https://terrafunded.com/wells/places/kyle-tx. License CC BY 4.0. https://doi.org/10.5281/zenodo.24126380.