How deep are water wells in Bastrop, Texas?
Home water wells in and around Bastrop, Texas are typically 245 to 390 feet deep (median 280 ft, 102 wells drilled in the last 10 years). All the wells the model covers draw from younger formations above the Woodbine, according to the state's Northern Trinity and Woodbine model (TWDB). The model covers 50% of those wells (51). Estimated cost of a complete well at the median depth: $9,500 to $23,500.
Updated every day from Texas Water Development Board driller reports. Last update: November 11, 2026, using the state file of November 10, 2026.
Under Bastrop, Bastrop County
Layers at the center of Bastrop from TWDB's Northern Trinity and Woodbine model (quarter mile cells, summarized here to about 1.3 miles), at true depth scale. The well and the water are the median of 102 real wells.
Digging in…
Home wells in and around Bastrop
Each dot is a home well from a state driller report, colored by depth. Tap one for its details and official report. Tap an empty spot to see what is under that point.
Well depth (ft)
- <100
- 100
- 200
- 300
- 400
- 600
- 800+
Dashed line: Bastrop and about 2 miles around it
Green: aquifer mapped by the state
Key figures
- Typical depth (middle half)
- 245 to 390 feet
- Median depth
- 280 feet
- Deepest 10% are past
- 460 feet
- Water level (median)
- 122 feet
- 82 wells
- Yield (median)
- 40 gpm
- 98 wells, gallons per minute
- Wells used
- 102
- In the last 10 years
- Inside the city limits
- 14
- the rest within 2 miles
- All years on file
- 230
- median 305 ft, since 2000
- Confidence
- Standard (30 or more wells)
When the wells were finished, the water stood a median 122 feet below the surface (82 wells), well above the bottom: the typical well holds about 158 feet of water.
Which formation do wells in Bastrop draw from?
All the wells the model covers draw from younger formations above the Woodbine, according to the state's Northern Trinity and Woodbine model (TWDB). The model covers 50% of those wells (51).
| Layer (state's model) | Share | Wells | Typical depth (ft) |
|---|---|---|---|
| Above the Woodbine | 100% | 51 | 268–330 |
For 100% of these wells the report says where the water enters (the screen or the open hole), and we use the middle of that interval.
The layers under the center of Bastrop
From the state's model, at 387 feet above sea level. These are the model's depths at that one point, not those of any particular lot.
| Layer (state's model) | Top (ft) | Bottom (ft) | Thickness (ft) |
|---|---|---|---|
| Above the Woodbineshale, chalk and marl | 0 | 3,684 | 3,684 |
| Woodbinesandstone with shale | 3,684 | 3,714 | 30 |
| Washita and Fredericksburglimestone, marl and clay | 3,714 | 4,276 | 562 |
| Upper Trinitysandstone, limestone and marl | 4,276 | 5,193 | 917 |
| Lower Trinitysandstone with shale and limestone | 5,193 | 6,209 | 1,016 |
Depth over time
There are not enough wells in both 2003 to 2007 and 2021 to 2025 (at least 30 in each) to say with confidence whether wells in and around Bastrop are getting deeper. For reference, the median was 260 feet in 2001 to 2005 (48 wells) and 280 feet in 2021 to 2025 (61 wells).
| Period | Median depth (ft) | Wells |
|---|---|---|
| 2001–2005 | 260 | 48 |
| 2006–2010 | 335 | 25 |
| 2011–2015 | 400 | 46 |
| 2016–2020 | 310 | 44 |
| 2021–2025 | 280 | 61 |
| 2026 | under 10 wells | 5 |
What a well costs in Bastrop
At the median depth for Bastrop (280 feet), a complete home well would cost roughly $9,500 to $23,500: $25 to $60 per foot for drilling, casing and seal, plus $2,500 to $6,500 for the pump, pressure tank, controls and hookup at the well. Across the whole middle half of depths (245 to 390 feet) the range runs from $8,500 to $30,000. This is TerraFunded's estimate from published Texas prices, not a quote, and it leaves out trenching and the line to the house. Get prices from at least two licensed drillers.
Where it sits
- Wells in Bastrop County
- Lost Pines Groundwater Conservation District (groundwater district)
- City · 30.1113, -97.3177
Nearby places
Median depth of home wells in each place.
- Camp Swift 280 ft
- Circle D-KC Estates 420 ft
- Wyldwood 240 ft
- Rosanky 462 ft
- Cedar Creek 260 ft
- Smithville 342 ft
Common questions
How deep do you have to drill a well in Bastrop, Texas?
Home water wells in and around Bastrop, Texas are typically 245 to 390 feet deep (median 280 ft, 102 wells drilled in the last 10 years). One in ten goes past 460 feet. The depth a given tract needs depends on where it sits and what layers the driller hits.
What aquifer or formation do wells in Bastrop draw from?
All the wells the model covers draw from younger formations above the Woodbine, according to the state's Northern Trinity and Woodbine model (TWDB). The model covers 50% of those wells (51). This is an estimate from the state's regional model, not a survey of the lot.
How much does a water well cost in Bastrop?
At the median depth (280 feet), a complete well would cost roughly $9,500 to $23,500, by TerraFunded's estimate from published Texas driller prices. The real price comes from a licensed driller's quote.
How deep is the water in Bastrop?
When the wells were finished, the water stood a median 122 feet below the surface (82 wells), well above the bottom: the typical well holds about 158 feet of water. The level moves with drought and from one well to the next.
Do I need a permit to drill a well in Bastrop?
Bastrop is inside the Lost Pines Groundwater Conservation District. Groundwater conservation districts in Texas can require registering or permitting a new well, keeping set distances from property lines and other wells, and paying fees. Rules differ from district to district: ask the district before drilling.
How these numbers are made
We count new and replacement domestic (home) wells whose coordinates fall inside the place boundary or within 2 miles of it. We use the last 10 years when there are at least 30 wells; otherwise all since 2001. The median is the middle well and the middle half runs from the 25th to the 75th percentile.
To tell which layer a well draws from, we take the ground elevation at its location, subtract the depth of the interval where water enters (or the bottom of the hole when the report does not give one) and see which layer of the state's model that point falls in.
For 100% of these wells the report says where the water enters (the screen or the open hole), and we use the middle of that interval.
How well it works: In 7,977 wells in the area of the state's Northern Trinity and Woodbine model (North and Central Texas) where the State of Texas recorded the aquifer, our estimate of the formation the well draws from names the same layer of the state's model in about 74% of them, and that layer or the one next to it in at least 95%; among the 3,130 of those wells that the state places in a Trinity layer (Paluxy to Hosston) it is about 56%.
- The layers come from the Texas Water Development Board's Northern Trinity and Woodbine model, with quarter mile cells, summarized here to about 1.3 miles. It is a regional model, not a survey of any lot: between one model point and the next, the real depth of each layer can differ.
- In this model every layer is at least 30 feet thick, even where the real rock is thinner or missing. Thin layers and the edges of the model are approximate.
- Inside the Trinity this atlas does not name single model layers: it groups the Paluxy and Glen Rose (upper Trinity) and groups the Hensell, Pearsall and Hosston (lower Trinity, Twin Mountains and Travis Peak), because the check against the state's codes shows the method cannot separate them reliably.
- "Near or below the base of the Trinity" means the well reaches the bottom of the model or passes it, often by tens of feet. Older rock that the model does not include may lie there.
- We never use the model's water levels. The water level on this page is the one each driller measured when the well was finished.
These are depths of real wells drilled nearby, not a promise about any property. Groundwater can change over short distances and with drought. A licensed water well driller can tell you what to expect on a specific tract.
Read the full methodology · Download the data (CSV, CC BY 4.0)
How to cite
TerraFunded (2026). Texas Well Atlas: Underground. From Texas Water Development Board driller reports and groundwater availability models (data as of November 10, 2026). https://terrafunded.com/wells/places/bastrop-tx. License CC BY 4.0. https://doi.org/10.5281/zenodo.24126380.
Sources
- Submitted Driller's Reports database, Texas Water Development Board (TWDB) (file of November 10, 2026)
- Hydrogeology and Documentation of the Northern Trinity and Woodbine Aquifer System Groundwater Availability Model (NTGAM). Ellis, J., Prieto-Estrada, A., Osborne, A., Deeds, N., White, J., and Keester, M. (INTERA Incorporated), for the North Texas Groundwater Conservation District and Groundwater Management Area 8, 2025, GAM v3.01. TWDB groundwater availability model.
- Texas place boundaries, U.S. Census Bureau (2023 cartographic boundary file)
- Ground elevation: Terrain Tiles (Mapzen), Registry of Open Data on AWS
- TWDB well report viewer (each well's official report)
