How deep are water wells in Hansford County, Texas?

Half of the home water wells drilled in Hansford County in the last 10 years are between 436 and 540 feet deep. The median is 485 feet, based on 46 driller reports filed with the state. Drillers measured the water standing a median 304 feet below the surface (42 wells). That is deeper than the Texas median of 250 feet.

Updated every day from Texas Water Development Board driller reports. Last update: November 10, 2026, using the state file of November 9, 2026. These are depths of real wells drilled nearby, not a promise about any property. Groundwater can change over short distances and with drought. A licensed water well driller can tell you what to expect on a specific tract.

Key figures

Typical depth (middle half)
436 to 540 ft
Median depth
485 feet
Deepest 10% are past
580 feet
Water level (median)
304 feet (42 wells)
Yield (median)
20 gallons per minute (13% pump-tested)
Wells used
46
Period
Last 10 years
Latest report
August 11, 2026
Depth rank
20 of 245 (1 = deepest)
Confidence
Standard

How deep the wells are

Number of home wells by depth, last 10 years (or since 2001 where wells are few).

Depth (ft)Wells
150 to 2001
300 to 3501
350 to 4004
400 to 4508
450 to 50010
500 to 55013
550 to 6005
600 to 6501
650 to 7002
700 to 7501

Are wells in Hansford County getting deeper?

Hansford County does not have enough domestic wells in both 2003 to 2007 and 2021 to 2025 (at least 30 in each) to compare. Read the 20-year study.

Aquifers under the county

The Texas Water Development Board maps the Ogallala, a major aquifer, at the surface (outcrop) across 100% of the county.

What a well costs in Hansford County

At the median depth for Hansford County (485 feet), a complete home well (drilling, casing, pump, pressure tank and hookup at the well) would cost roughly $14,500 to $35,500, by TerraFunded's estimate from published Texas prices. Trenching and the line to the house are extra. Get quotes from at least two licensed drillers.

Neighboring counties

Common questions

How deep do I need to drill a well in Hansford County?

The middle half of home wells drilled there are 436 to 540 feet deep; one in ten goes past 580 feet. The depth a given tract needs depends on where it is and what layers the driller hits.

How much does a water well cost in Hansford County?

At the median depth (485 feet), a complete well would cost roughly $14,500 to $35,500 by TerraFunded's estimate from published Texas driller prices ($25 to $60 per foot plus pump and equipment). The real price comes from a driller's quote.

How much water does a well produce in Hansford County?

Drillers reported a median of 20 gallons per minute (24 wells). Only 13% of those figures come from a pump test; the rest are the driller's estimate, so treat them as a guide.

Are wells in Hansford County getting deeper?

Hansford County does not have enough domestic wells in both 2003 to 2007 and 2021 to 2025 (at least 30 in each) to compare.

How do I see the well report for a property or a neighbor's well?

Every well drilled in Texas since 2001 has a public driller's report. On this page's map, tap a well to open its official report on the state's site, or look it up by location in the TWDB viewer.

How to read these numbers

Figures cover new and replacement domestic (home) wells, from the reports licensed drillers file with the state. Read the full methodology. Download the county table (CSV).

How to cite: TerraFunded Texas Well Atlas, from Texas Water Development Board driller reports (data as of November 9, 2026). https://terrafunded.com/wells

Sources

All counties