How deep are water wells in Glasscock County, Texas?

Half of the home water wells drilled in Glasscock County in the last 10 years are between 180 and 315 feet deep. The median is 265 feet, based on 91 driller reports filed with the state. Drillers measured the water standing a median 162 feet below the surface (72 wells). That is deeper than the Texas median of 250 feet.

Updated every day from Texas Water Development Board driller reports. Last update: November 10, 2026, using the state file of November 9, 2026. These are depths of real wells drilled nearby, not a promise about any property. Groundwater can change over short distances and with drought. A licensed water well driller can tell you what to expect on a specific tract.

Key figures

Typical depth (middle half)
180 to 315 ft
Median depth
265 feet
Deepest 10% are past
340 feet
Water level (median)
162 feet (72 wells)
Yield (median)
20 gallons per minute (4% pump-tested)
Wells used
91
Period
Last 10 years
Latest report
July 2, 2026
Depth rank
123 of 245 (1 = deepest)
Confidence
Standard

How deep the wells are

Number of home wells by depth, last 10 years (or since 2001 where wells are few).

Depth (ft)Wells
50 to 1006
100 to 1507
150 to 20016
200 to 2508
250 to 30021
300 to 35025
350 to 4007
400 to 4501

Median depth by year

Median depth of home wells finished each year. Years with fewer than 10 wells are not shown.

YearMedian (ft)Wells
201015818
201132018
201325018
201430010
20169014
201716014
202029210
202129210
202231512

Are wells in Glasscock County getting deeper?

Glasscock County does not have enough domestic wells in both 2003 to 2007 and 2021 to 2025 (at least 30 in each) to compare. Read the 20-year study.

Aquifers under the county

The Texas Water Development Board maps the Edwards-Trinity (Plateau), a major aquifer, at the surface (outcrop) across 76% of the county and below other rock (subsurface) across 17% of the county; the Ogallala, a major aquifer, at the surface (outcrop) across 22% of the county; the Dockum, a minor aquifer, under 17% of the county.

What a well costs in Glasscock County

At the median depth for Glasscock County (265 feet), a complete home well (drilling, casing, pump, pressure tank and hookup at the well) would cost roughly $9,000 to $22,500, by TerraFunded's estimate from published Texas prices. Trenching and the line to the house are extra. Get quotes from at least two licensed drillers.

Neighboring counties

Common questions

How deep do I need to drill a well in Glasscock County?

The middle half of home wells drilled there are 180 to 315 feet deep; one in ten goes past 340 feet. The depth a given tract needs depends on where it is and what layers the driller hits.

How much does a water well cost in Glasscock County?

At the median depth (265 feet), a complete well would cost roughly $9,000 to $22,500 by TerraFunded's estimate from published Texas driller prices ($25 to $60 per foot plus pump and equipment). The real price comes from a driller's quote.

How much water does a well produce in Glasscock County?

Drillers reported a median of 20 gallons per minute (71 wells). Only 4% of those figures come from a pump test; the rest are the driller's estimate, so treat them as a guide.

Are wells in Glasscock County getting deeper?

Glasscock County does not have enough domestic wells in both 2003 to 2007 and 2021 to 2025 (at least 30 in each) to compare.

How do I see the well report for a property or a neighbor's well?

Every well drilled in Texas since 2001 has a public driller's report. On this page's map, tap a well to open its official report on the state's site, or look it up by location in the TWDB viewer.

How to read these numbers

Figures cover new and replacement domestic (home) wells, from the reports licensed drillers file with the state. Read the full methodology. Download the county table (CSV).

How to cite: TerraFunded Texas Well Atlas, from Texas Water Development Board driller reports (data as of November 9, 2026). https://terrafunded.com/wells

Sources

All counties